Avanti MO9005BST Setting A Cooking Program, A. One-stageCooking, B. Multi-stageCooking

SETTING A COOKING PROGRAM

A. One-stage Cooking				B. Multi-stage Cooking
1. Use the number pads to set a cooking time.				For added convenience your oven offers the ability
	You can set a cooking time from one second to			to operate in a “Multi-Stage” cooking cycle. Each
	99 minutes and 99 seconds.			cycle or stage can be set with a separate cooking
2. If you want to set a power level other than				time and or power level.
	100% power, touch POWER, then use the				a) To set the oven in Multi-Stage cooking
	number pads to enter the power level. You can				model, simply set the time and power level
	set the power level from 1 to 9.				of the first stage (as described in Section
	Use single digits to set a cooking power level:				One-Stage Cooking to the left).
					b) To set the second cooking stage, press the
					COOK key (“MEM” will appear in the
					display window).
		Number pad	Cooking power		c) Select the desired cooking time and power
		9	90%		level for the second stage.
					d) Press “Start” to begin the cooking process.
		8	80%
		7	70%	NOTE:
		6	60%
				After cooking stage 1 has elapsed, you will hear
		5	50%
					one “beep” sound, signaling the beginning of
		4	40%		stage 2. After the total time (selected cooking
		3	30%		times for both stages) has elapsed, 4 “beeps”
		2	20%		will sound and “END” will appear in the display
					window. Touch the “RESET” button or open the
		1	10%
					oven door to clear or end the cooking program
3. Touch START/STOP to start cooking.
					before starting another cooking function.
SPEED DEFROST
1.	Touch SPEED DEFROST.			DEFROST BY WEIGHT
2.	Enter desired defrosting time by touching
				1.	Touch DEFROST BY WEIGHT pad.
	correct number pads. Digital timer sets minutes
				2.	Enter weight.
	and seconds from left to right so a single digit
				3.	Touch START/STOP pad.
	can be set (5 for 5 seconds ) or up to 4 digits
				Note:
	(2405 for 24 minutes 5 seconds).
				Weight must be in pounds and ounces.
3.	Touch START/STOP.
				Ounce weights less than 10 must be preceded by
NOTE:				a 0. If label gives weight in pounds only, change
				the fraction of a pound to ounces using the
After time has elapsed four signals sound and END
				following chart (See page 14).
appears in display. Touch RESET pad or open door
to clear END before starting another cooking
function.

14