CARE AND MAINTENANCE

CLEANING YOUR WINE CHILLER

•Turn off the power, unplug the appliance, and remove all items including shelves.

•Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

•Wash the shelves with a mild detergent solution.

•Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

•Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

•Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel particles and rusting may occur.

POWER FAILURE

•Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

MOVING YOUR WINE CHILLER

• Remove all items.

• Securely tape down all loose items (shelves) inside your appliance.

• Tape the door shut.

• Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.

ENERGY SAVING TIPS

•The Wine Chiller should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.

CHARCOAL FILTRATION SYSTEM

Your wine is a living object that breathes through the cork of its bottle. In order to preserve the quality and taste of your fine wines, they must be stored at the ideal temperature and ambient conditions. Your cellar is equipped with an active charcoal filtration system to ensure air purity, cooling efficiency, and to maintain an odor free cabinet for the storage of your fine wines. The filter assembly is located at the rear panel inside your cellar.

Keep in mind, that this filter must be changed every 12 months.

To purchase replacement filters, call our Parts / Service Department at 1 – 800 – 220 – 5570. To replace your filter:

1

Remove the bottles of wine stored on the two (2)

 

 

 

shelves in front of the filter.

 

 

2

Remove the shelves and set aside to be replaced

 

 

 

once you have changed the filter

 

 

3

Hold the filter and turn it at 45 degrees in the

 

 

 

counter-clockwise direction and then pull it out.

 

 

4

Remove the existing filter and replace with a new

 

 

 

one.

 

 

5

Put the new filter into the hole and then turn the filter

 

 

 

at 45 degrees in clockwise direction.

 

 

 

 

 

Turn Left to remove filter.

 

 

 

 

 

 

12

Page 11 Page 13
Page 12
Image 12
Avanti WCR506SS instruction manual Care and Maintenance
Page 11 Page 13

WCR506SS specifications

The Avanti WCR506SS is a standout addition to the world of beverage coolers, offering a perfect blend of functionality and aesthetic appeal for both home and commercial settings. With an impressive capacity, sleek design, and advanced cooling technology, it is ideal for wine and beverage enthusiasts seeking to store their drinks at optimal temperatures.

One of the defining features of the Avanti WCR506SS is its spacious storage capacity. It can accommodate up to 28 standard-sized wine bottles, making it suitable for those with a growing collection or for hosting gatherings. The interior is designed with adjustable shelves, allowing users to customize the layout to fit different bottle sizes, whether they are standard wine bottles or larger champagne bottles. This flexibility ensures that users can maximize storage efficiency without sacrificing accessibility.

The Avanti WCR506SS is equipped with a powerful compressor cooling system, which maintains a consistent temperature range between 40°F and 65°F. This is essential for preserving the quality of various wines and beverages. The adjustable thermostat allows users to choose the precise temperature, ensuring that each drink is served at its best. The dual-zone functionality is an added advantage, enabling the storage of both red and white wines at their ideal temperatures.

Aesthetically, the Avanti WCR506SS boasts a stainless steel frame and a tempered glass door, which not only enhances its durability but also provides an elegant look that complements any decor. The interior LED lighting sets the perfect ambiance while helping users view their collection without having to open the door. This feature also assists in maintaining temperature stability.

Furthermore, the quiet operation of the cooler ensures that it can be placed in virtually any environment without causing disturbance. The unit is energy efficient, making it an eco-friendly option for those who are conscious of their energy consumption. It also includes a lock and key feature for added security, perfect for safeguarding valuable collections.

In conclusion, the Avanti WCR506SS is an exceptional wine and beverage cooler that combines an attractive design with advanced features. Its ample capacity, adjustable shelving, precise temperature control, and stylish aesthetics make it a must-have for wine connoisseurs and casual drinkers alike. Whether for personal use or entertaining guests, this cooler stands out as a reliable and stylish solution for beverage storage.
Top Page Image Contents