INSTALLATION INSTRUCTIONS
BEFORE USING YOUR WINE CHILLER
•Remove the exterior and interior packing.
•Check to be sure you have all of the following parts:
| Model WBV21DZ |
| Model WCV42DZ |
| Wine / Beverage Center |
| Dual Zone Wine Chiller |
1 | Instruction Manual | 1 | Instruction Manual |
5 | Wine Bottle Shelves (Wire) | 10 | Wine Bottle Shelves (Wire) |
1 | Wine Bottle Shelf / Basket (Wire) | 2 | Wine Bottle Shelf / Basket (Wire) |
3 | Beverage Shelves (Glass) | 4 | Keys |
1 | Storage Basket (Wire) |
|
|
4 | Keys |
|
|
•Before connecting this appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR WINE CHILLER
•This appliance is designed to be for free standing installation or
•Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling legs at the bottom of the Wine Chiller.
•Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
•Avoid locating the unit in moist areas.
•Plug the Wine Chiller into an exclusive, properly
BUILT – IN CABINET INSTRUCTIONS
This unit is designed for both
Cabinet Opening Dimensions
|
| IN (min) | CM (min) | |
| Width | 24” | 61 cm | |
| Depth | 24” | 61 cm | |
| Height | 34 ½” | 87.6 cm | |
|
|
|
|
|
|
|
|
|
|
9
