Step 5: Installing the Anti‐Tip Safety Bracket:

a)Attach the Anti‐Tip Safety Bracket (Parts G and H) to the Stacking bracket as shown. By joining the two

(2) parts using the Phillips Head Screw and Nut (Parts K and N).

b)Align the assembled Stacking bracket in place and mark where the Anti‐Tip Safety Bracket is to be attached to the wall.

c)Using the Wall Anchors and Self Tapping Phillips head screws (Parts L and M) included to attach the assembled Stacking bracket to the wall.

Step 6: Installing Your Avanti Dryer (Model D110) to the top shelf.

In order to place your Avanti Dryer (Model D110) on the stacking kit you must first remove the four (4) leveling legs from the bottom of the dyer.

a)Place the Dryer on the top shelf.

b)Re‐install the four (4) leveling legs previously removed through the underside of the top shelf and tighten until the dryer is secure.

6

Page 6
Image 6
Avanti WDB101 Installing the Anti‐Tip Safety Bracket, Installing Your Avanti Dryer Model D110 to the top shelf