Avaya 3616 Wireless Telephone and Desktop Charger
with CCMS
Setting User Preferences
When the Wireless Telephone is in standby mode (on but
not in use), press and briefly hold FCN to display user
options. Check with your system administrator for specific
features supported by your Wireless Telephone.
DOWN button displays next menu item.
UP button displays previous menu item.
SELECT button selects or changes item.
UP softkey or FCN returns to previous menu level.
Power Off/End Call or
press FCN a 2nd time exits menus
User Option Menu
Action:
Ring Type Select Telephone Ring to set the
standard ring on the Wireless
Telephone.
Normal: is the factory default ring.
Vib/norm ring: vibrates for 5
seconds and then rings.
Vibrator ring: vibrates for a non-
audible call alert.
Press 0 to select
desired ring type. The
ring type currently set
displays with an
asterisk.
Noise Mode Adjusts the Wireless Telephone to
account for background noise.
Normal: for most office
environments
High: for moderate background
noise
Severe: for extremely noisy
conditions.
Select an option that
describes the noise in
your environment.
Current IP address In IP systems, the IP address of the
Wireless Telephone is displayed.
This number may not be edited.
None
Call Server IP The IP address of the call server.
This number may not be edited.
Call Server Port The call server port used by the
phone. This number may not be
edited.
(Additional options may be present. Contact your system administrator for information.)
Page 14 555-301-709
Issue 3