Avaya 500 - page 11

12VDC power supply (included)

1/8” mini-plug trigger cable (optional)

➨ Connect to trigger

hardware

mono RCA cable (included)

➨ Connect to phone

system’s MOH

port

Figure 4 - Installation Diagram

Connection Instructions

1. Turn the power switch OFF. Plug the included power supply into a surge-

protected 110VAC outlet and the 12VDC jack on the SoundBrick 500. Only

use the power supply provided with the unit (12VDC, 500mA, center pin

positive). Many power supplies look alike, but provide different output. Using

the wrong one will void your warranty and may damage the unit.

2. Connect either the 8Ω or 1KΩ audio output jack to the phone system’s MOH

port using a mono RCA-to-RCA cable (included). If the sound system does not

have an RCA-style input, an adapter may be required (not included).

3. Connect the optional 1/8” mini-plug trigger cable to the trigger jack if you are

using this feature.

SoundBrick 500 01/08/2001