GB
11
Telephone Features Please refer to Figure One at the front of this user guide
1 The telephone is supplied with a protective cover over the
display. Carefully peel this off before using the telephone.
The large LCD panel normally shows the time of day and the
number of new calls that you have not yet viewed. With
incoming calls or when viewing the directory or viewing the
calls list it will show the date, the number and the name of the
caller (if programmed into the directory or the IP OFFICE).
There are several prompts that also tell you what state the
telephone is in at a particular moment in time (see detailed
instructions on page 14).
2
Use this button to delete a Directory memory.
Access the Directory memory to be deleted and press this
button TWICE in quick succession.
“ERASE” will appear on the display and the memory will be
deleted.
3 To adjust the volume of the Handset, Headset and Handsfree,
Press the ▲ and ▼ volume buttons.
Note: The ▲ and ▼ can also be used as Scroll Up or Down
buttons to review the Redial, Directory and the Caller memory
list. The Scroll buttons also serve as Edit buttons during
memory storage.
4
Use this button to program the 100 telephone numbers and
names in your Directory and the 10 Direct Access memory
buttons 11.
5
The red message waiting light flashes when you have a
message. It also flashes when your telephone rings.