GB
18
Programming Direct Access memory buttons To store a Direct Access memory; Press the button. “STORE” will appear on
the display.
Press one of the Direct Access memory buttons 11, where you wish the memory
to be stored.
NOTE: if the button is pressed once the memory will be stored under the button
as a one-touch button. If the memory button is pressed twice in quick succession,
the memory will be stored under the button as a two-touch button.
At the prompt dial the number to be stored. It is possible to store the Handsfree
function as the first character. In this case when a memory button is
pressed, the telephone will automatically seize the line and make the call, in
Handsfree mode.
Press the button
- at ”ENTER NAME” prompt key in the name to be stored using the numeric
keypad press the appropriate button a number of times to display the letter you
require. Press the ► to move the cursor to the next space use the ◄►buttons
to edit the name or ▲▼ buttons to edit the number.
Press the button
“STORE COMPLETED” will appear on the display.
If you make a mistake in entering the data, simply overwrite the memory data by
doing the entry again.