4 Registering the Pocket Phone to a Dual Radio Module Setting Up and Registering the
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-19038 Issue 2, February 2001
3 To exit any screen and move back to the previous screen, OR, if you do not want
to make any changes at this time, press the Softkey ( ) below Back. To exit
Menu Mode, press the Menu button.
4 Once all handsets have been registered, proceed to the instructions in “Mapping
to the Correct Communications System” on page 40.
Removing Registration Between a Handset and a Dual Radio Module
To unregister a handset and a radio module:
1 Follow Steps 1 through 5 of the registration procedures.
2 At the Registration screen (Zone 1 and Zone 2), press the Softkey ( ) below
UnReg.