Avaya 1100 Series, NN43110-301 Avaya 1100 Series Expansion Module startup initialization

Setup and assembly

Avaya 1100 Series Expansion Module startup initialization

After the Avaya 1100 Series Expansion Module is installed and powered

up on the IP Deskphone, the Expansion Module initializes.

Table 2 on page 17 lists the initialization process for the Expansion

Module.

Table 2: Initializing Expansion Module (Part 1 of 2)

Phase Description

Expansion

Module performs

self-test

The self-test confirms the operation of the

Expansion Module local memory, CPU, and other

circuitry. While undergoing this self-test, the

Expansion Module display lights up.

Note: If the Expansion Module display does

not light up, or lights up and then goes blank,

or fails to begin flashing, check that the

Expansion Module is correctly installed and

configured.

Expansion

Module

establishes

communication

with the

IP Deskphone

The Expansion Module display flashes until it

establishes communication with the IP Deskphone.

If the Expansion Module display does not stop

flashing, communication has not been established

with the IP Deskphone. Check that the Expansion

Module is correctly installed and configured.