User’s Manual
The eight windows on the top side of the screen are used to view the Live
video from channel 1 to channel 8 respectively, and the other windows allow
user to view Playback image from channel 1 to channel 8.
4.2 Sequence Setup
This section introduce you how to view in sequence mode with both Main
Monitor and Call Monitor, if connected. Sequence function can avoid
manually backtracking and give more flexibility while surveillance.
4.2.1 Sequence with Main Monitor
Automatic sequence function can be used in any view mode with the Main
Monitor. Select certain view format and press SEQ to toggle the automatic
sequential sequence, press ESC to stop sequencing. The figure below
displays sequence via 4-camera window.
4.2.2 Sequence with Call Monitor
Users are allowed to use the DRT16 / DRT8 DVR front panel to control a call
monitor display without having to access the Main menu. Two viewing modes
can be displayed on call monitor: Sequence display and Single camera
display.
Follow the steps to control the call monitor.
• Press the CALL key on the front panel to enter call monitor control mode,
the message “Call Mode” will be shown on the bottom-left of the screen.
Press 1-8 Key To Select Channel
Press SEQ To Enable Sequence
Call Mode
• Press CHANNEL key to display the associated camera on call monitor.
24