US
De-scaling
US
You should
Pour 2 fl oz ⁄ 50 ml of vinegar (white) mixed with 4 fl oz ⁄ 100 ml of cold water into the Warmer (with basket in place). Allow to stand in the unit until any limescale has dissolved. Empty the unit and rinse thoroughly.
Guarantee
Cannon AVENT guarantees that should the Express Bottle Warmer become faulty during twelve months from the date of purchase, it will be replaced free of charge during this time. Please return it to the retailer where it was purchased. Please keep your receipt as a proof of purchase. For the guarantee to be valid, please note:
•The Warmer must be used according to the instructions in this leaflet and connected to a suitable electricity supply.
•The claim must not be a result of accident, misuse, dirt, neglect or fair wear and tear.
AVENT® is here to help
Call
Important
Safeguards
When using electrical appliances, basic safety precautions should always be followed including the following:
1.Read all instructions.
2.To protect against electrical shock do not immerse cord, plugs or appliance in water or other liquid.
3.Close supervision is necessary when any appliance is used by or near children.
4.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
5.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
6.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
7.Do not use outdoors.
8.Do not let cord hang over edge of table or counter, or touch hot surfaces.
9.Do not place on or near a hot gas or electric burner, or in a heated oven.
10.Extreme caution must be used
when moving an appliance containing hot oil or other hot liquids.
11.Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
12.Do not use appliance for other than intended use.
13.When in use the Warmer contains hot water.
14.Before plugging in the Warmer for the first time, ensure the voltage is compatible with your electrical supply by checking the label on the base of the unit.
15.Always place bottle into Warmer before adding water.
16.Ensure water has been added before switching the unit on.
17.When the feed has reached the required temperature, remove immediately. If left in the Warmer, the temperature of the feed will continue to increase.
18.The AVENT Express Bottle Warmer
is fitted with a
appliance CANNOT be replaced. If the cord is damaged, the appliance should be discarded.
19.This product is manufactured to comply with the Radio Interference Requirements and the EEC Directive 89⁄336⁄EEC.
20.A short power cord has been provided to prevent the risk of it becoming entangled or being tripped over.
21.Extension cords may be used if care is exercised in their use.
22.If an extension cord is used, its electrical rating must be as great as the rating of the appliance and not draped over the edge of the table top where it could be pulled by children or tripped over.
Save these instructions
6 | 7 |
