US AVENT Express Bottle and Babyfood Warmer
US
Please read through these instructions carefully before using your AVENT Express Bottle and Babyfood Warmer for the first time. Please retain for future reference. These instructions are also available on our website.
The AVENT Express Bottle and Babyfood Warmer allows you to warm all AVENT feeding bottles and AVENT Magic™ Cups, as well as baby food jars and cans, safely and quickly.
The speed at which the Warmer heats the milk or food will depend on the size of the bottle or container and the starting temperature of the milk or food (ie. room temperature 20 °C or out of fridge 5 °C).
The guide at the beginning of this leaflet gives an indication of the time you can expect the Warmer to take. Always test the temperature of food before feeding to your baby.
Instructions for Use
For AVENT Feeding Bottles
1)Ensure basket is in place inside the Warmer.
2)Place the assembled, filled bottle in the Warmer with the dome cap removed.
3)For 4 fl oz ⁄ 125 ml bottles, fill the Warmer with water to just above the level of milk in the bottle.
4)For larger bottles, fill the Warmer to 15 mm (1⁄2 inch) below the rim of the Warmer.
5)Never let the water level rise above the neck of the bottle or spill over the edge of the Warmer.
6)Plug the unit into an electrical outlet and click the switch to the ON position (I), the neon light will illuminate. Turn the dial to setting 3.
7)When the bottle has been in the Warmer for the appropriate time (See guide), the light will flash on and off intermittently to indicate that the water surrounding the bottle is being kept at a constant temperature.
8)Remove immediately. Replace the dome cap. Shake the bottle and test the temperature of the liquid by sprinkling a few drops onto your wrist.
9)If the food is not ready, replace the bottle in the Warmer. TAKE CARE NOT TO OVERHEAT. The water surrounding the bottle will be kept at a constant temperature but the temperature of the food will continue to increase. If the food is too hot, allow to cool. Always test temperature before feeding.
10)Once the bottle has reached the correct temperature and has been removed from the unit, switch off warmer (O) and unplug from the electrical outlet.
Note: The basket can be removed when heating the AVENT Magic™ cup and other makes of bottles.
For the AVENT Disposable System
1)Ensure basket is in place inside the Warmer.
2)Place the assembled, filled Disposable Nurser in the Warmer with the dome cap removed.
3)Fill the Warmer with water to the level of milk in the bottle liner.
4)Plug the unit into an electrical outlet and click the switch to the ON position
(I). The neon light will illuminate. Turn the dial to setting 2 and continue as
Note: Do not attempt to heat milk in the Disposable bottle liners on a higher setting as this could cause the bags to burst.
The Warmer can also be used to warm breast milk in the AVENT Disposable System in the same way.
For baby food jars
1)Ensure basket is in place inside the Bottle Warmer.
2)Remove the lid and place jar or can in the Warmer.
3)Fill the Warmer with water to 15 mm (1⁄2 inch) below the top of the jar.
4)Plug the unit into an electrical outlet and click the switch to the ON position
(I) Turn the dial to setting 3.
5)The Warmer will work in the same way as for feeding bottles. Take care when removing the jar as it, and the water surrounding it, will be hot. Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby. TAKE CARE NOT TO OVERHEAT.
6)If the food is not ready, replace the jar in the Warmer. The water surrounding the jar will be kept at a constant temperature but the temperature of the food will continue to increase. TAKE CARE NOT TO OVERHEAT. If the food is too hot, allow to cool. Always test temperature before feeding.
7)Once the feed has reached the correct temperature and has been removed from the unit, switch off (O) and unplug from the electrical outlet.
Note: For small jars you can place a screw ring from an AVENT Bottle below the jar before adding the water so that you can remove the container more easily.
Care of your Bottle Warmer
Switch off (O), unplug and allow to cool before cleaning. Remove basket and wipe inside and outside with a damp cloth only.
DO NOT USE AN ABRASIVE CLEANER.
In order to reduce limescale build up, you can use
4 | 5 |
