1.9.3.2Settings

Setting for correct COM Port for Serial Control and the Device number for identification.

1.9.3.3Connect

Makes connection to attached device via RS232 to USB Adapter.

1.9.3.4Disconnect

Disconnects the attached device.

1.9.3.5Input Resolution

Here you can set the resolution of Input. It can take up to 10 seconds for new resolution to take effect.

1.9.3.6Main Source

Choose one of the Input sources from DVI, VGA, CVBS or S-Video

1.9.3.7Sub Source

Choose one of the Input sources from DVI, VGA, CVBS or S-Video

1.9.3.8Display Layout Mode

Setting the layout of the main and sub sources in mixed video.

1.Main Full Screen: Only main source is displayed in the mixed video

2.Sub Full Screen: Only sub source is displayed in the mixed video

3.PIP Mode: The main source is displayed as the background, and the sub source is shown has Picture-in-Picture.

4.Side by Side: The two input sources are displayed side by side

5.Custom Define PAP: User can adjust the layout of the two input sources without any limitations.

Main and Sub sources can be from the same Input.

www.avenview.com

14

 

 

Page 14
Image 14
Avenview DVI-VIDEOWALL-9X Settings, Connect, Disconnect, Input Resolution, Main Source, Sub Source, Display Layout Mode