Avenview SPLIT-HDSDI-6-RS Getting Started, Important Safeguards, Safety Instructions

Section 1: Getting Started

1.1Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

∙Any product, on which the serial number has been defaced, modified or removed.

∙Damage, deterioration or malfunction resulting from:

∙Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

∙Repair or attempted repair by anyone not authorized by us.

∙Any damage of the product due to shipment.

∙Removal or installation of the product.

∙Causes external to the product, such as electric power fluctuation or failure.

∙Use of supplies or parts not meeting our specifications.

∙Normal wear and tear.

∙Any other causes which does not relate to a product defect.

∙Removal, installation, and set-up service charges.

1.2Safety Instructions

The SPLIT-HDSDI-6-RS, 6 Port HD/SD-SDI splitter with reclocking has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SPLIT-HDSDI-6-RS should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

∙Do not dismantle the housing or modify the module.

∙Dismantling the housing or modifying the module may result in electrical shock or burn.

∙Refer all servicing to qualified service personnel.

∙Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards

∙Keep the module away from liquids.

∙Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.

∙Have the module checked by a qualified service engineer before using it again.

∙Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

www.avenview.com 3