Avenview SPLIT-HDSDI-6-RS Before Installation, Panel Description, Front Panel, Rear Panel

Models: SPLIT-HDSDI-6-RS

1 9

Page 5

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com	5

Image 5

Contents

Models SPLIT-HDSDI-6-RS 6 Port HD/SD-SDI Splitter with ReclockingUser’s Guide Regulatory Notices Federal Communications Commission FCC Table of Contents1.2 Safety Instructions 1.1 Important Safeguardsreference What the warranty does not cover Section 1 Getting Started1.6 Package Contents 1.5 Features1.3 Regulatory Notices Federal Communications Commission FCC 1.4 Introduction1.8 Panel Description 1.7 Before InstallationFRONT PANEL REAR PANELAutomatically reclocks bypassed SDI signals Auto rate detect 143 Mbps rate operation supported only in ARD modeForce to bypass SDI signal Default Operation modeSection 2 Installation Description Section 3 SpecificationsDisclaimer