1.4.4.1 Basic Devices

•Cameras

Connect the video output of each video camera or composite video source to the CH1 ~ CH4 connectors.

•VGA monitor

Connect a VGA monitor to the VGA OUT connector of the DVR unit to use as a display for video surveillance and playback.

•Power adapter

Plug the provided 110V AC or 220V power adapter into the DVR unit's power socket.

1.4.4.2 Optional Devices

•Television monitor

Use a BNC-to-RCA adapter to connect a regular TV monitor to the DVR unit's VIDEO OUT connector.

•Sensors and alarm device

Connect up to four sensor devices to the terminals that are numbered 1 to 8 at the back panel. Each pair of terminals is for the ground (-) and positive (+) input voltage. For instance:

Terminal 1 : Connect to the ground (-) wire of Sensor 1

Terminal 2 : Connect to the positive (+) wire of Sensor 1

....

....

Terminal 7 : Connect to the ground (-) wire of Sensor 4

Terminal 8 : Connect to the positive (+) wire of Sensor 4

Connect an alarm device to the terminals that are numbered 9 and 10:

10