3.9 SENSOR SETUP

SENSOR SETUP

 

> SENSOR RECORD TIME

15

ALARM OUT TIME

05

CHANNEL-1

TYPE:NORMAL-CLOSE

CHANNEL-2

TYPE:NORMAL-OPEN

CHANNEL-3

NOT INSTALLED

CHANNEL-4

NOT INSTALLED

PRESS (< , >), THEN(SELECT)

PRESS (MENU) TO EXIT

3.9.1 SENSOR RECORD TIME

This determines the duration of sensor recording (in minutes) in the event that the sensor devices detect an event. There are 6 selections to choose from.

3.9.2 ALARM OUT TIME

This determines the duration of sound (in minutes) that is set off when the alarm device is triggered.

3.9.3 CHANNEL-1 ~ CHANNEL-4

These correspond to the four sets of sensor inputs on the DVR unit. Customize these according to the initial state of the attached sensor devices. There are three states to choose from:

NOT INSTALLED : Indicates that the channel does not have a sensor device connected.

NORMAL-OPEN : Indicates that the initial state of the sensor device is Normal-Open. When the sensor device detects an event and its state changes to Normal-Close, video recording is initiated.

NORMAL-CLOSE: Indicates that the initial state of the sensor device is Normal-Close. When the sensor device detects an event and its state changes to Normal-Open, video recording is initiated.

26