2.1.3 Set up the System Date and Time
Before starting record video, adjust the date and time first.
1. | Press |
| to call up the OSD menu and then use | ▲ | and | ▼ | to go up and | |||||||
| down and select Submenu. And then, press |
|
| to confirm the selection. | ||||||||||
|
|
| ||||||||||||
|
|
| ||||||||||||
2. | In Submenu, select the Date and press |
|
| again to make a selection. And then, | ||||||||||
|
| |||||||||||||
| ||||||||||||||
| use | ▲ | and ▼ | to adjust the date and use | ▼ | and | ▼ | buttons to move | ||||||
| the selection to the left and right. |
|
|
|
|
|
|
|
| |||||
3. | To adjust Time, follow the above step 2 and 3. |
|
|
|
|
|
| |||||||
4. | Press |
| to go back to main menu after adjustment. |
|
|
|
| |||||||
2.2Surveillance Screen
User can switch to display each channel in full screen or 4 channels at the same time in D1 or CIF record mode.
To know if the channel is being recorded, the “ ” record symbol would appear beside the channel number. The 
(microphone) and 
(speaker) indicate the availability of audio. The information below the screen shows the current date and time, recording mode (record schedule setting), hard disk drive (Master/Slave) and the percentage of the used hard disk space.
D1 (A) HDD 29% | CIF(A) HDD 29% |
Full screen Preview | Quad Screen Preview |
When you are in full screen preview, press the following buttons on the remote control and control panel to switch to different channel, or preview all 4 channels:
1 | 3 | 7 | 9 | 5 |
CH1: Camera 1 | CH2: Camera 2 | CH3: Camera 3 | CH4: Camera 4 |
2.3Playback the Video
If the unit is recording the video, you may have to stop video recording in order to do
video playback. To stop video recording, press
.
12