1.5Setting Up the DVR Unit
1.5.1 Installing the Hard Disk
The DVR unit allows you to install one hard disk. Before installing the hard disk, make sure to set the hard disk master/slave jumper setting. Adjust the jumper setting according to the instructions on the hard disk label. Please set the jumper of hard disk as Master. Follow the illustrated instructions below to install the hard disk:
1.Using key to unlock the hard disk key 2. Pull removable hard disk drawer out lock
3. Connect the power connector to the 4. Connect the IDE cable to hard disk hard disk (master)
5.Turn the drawer over and secure the hard disk with 4 screws on the hard disk removable drawer
7.Using key to lock the hard disk key lock
6. Slide the drawer back
8.You may now connect all the cables. When the power is connected, the Power LED light 
turns on
i | - | Use 40GB/ 7200RPM IDE hard disk or larger is recommended. |
|
- The DVR unit support hard disk hot swap. Therefore, user can swap the hard disk without shutdown the DVR unit.
5