OSD MENU |
|
|
|
| Description |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HARD DRIVE | SETUP |
|
|
|
| OVERWRITE | ENABLED : |
|
|
| YES |
|
| |||
| OVERWRITE | ENABLED | 78MB | |||||
| HDD SIZE | 37 | GB | Enable/disable replacing the earliest recorded file when | ||||
| HDD USED | 0 | GB | 232MB 0% | ||||
| HDD FORMAT |
|
|
|
| the hard disk | space runs out. By default, the HDD | |
overwrite setting is enabled.
HDD FORMAT :
*HDD SIZE shows the total capacity of the hard disk.
*HDD USED shows the amount of space that has been used.
For security purpose, you may have to enter the password to format hard disk.
To format hard disk:
1.Use the ▲ and ▼ or 
and 
buttons to go up and down and select
HDD FORMAT. Then press 
or
▲(play).
2. In the CHECK PASSWORD screen, press
,
▲
(play) or
▼ ▼
. Then use the ▲ and
▼or 
and 
buttons to select the security combination number.
Press
,
▲
(play), or
▼ ▼
button again to
make the selection. Or, use the number key buttons on the remote control to enter the password.
3. To move the selection to the left and right, use
▼ ▼
and
▼ ▼
buttons.
CHECK PASSWORD
ENTER PASSWORD
4.After entering the last number, the “PASSWORD CORRECT” appears, you are now authorized to format the hard disk.
5.It is done when the “HDD FORMAT COMPLETED” appears.
Formatting the hard disk will permanently delete all the recorded files. The recorded files will be no longer for retrieving.
20