OSD MENU
HARD | DRIVE | SETUP |
|
|
OVERWRITE | ENABLED | YES |
| |
HDD | SIZE | 37 | GB | 78MB |
HDD | USED | 0 | GB | 232MB 0% |
HDD | FORMAT |
|
| |
|
|
|
|
|
|
|
|
|
|
*HDD SIZE shows the total capacity of the hard disk.
*HDD USED shows the amount of space that has been used.
Description
OVERWRITE ENABLED :
Enable/disable overwriting the earliest record when the hard disk space runs out. By default, the HDD overwrite setting is enabled
HDD FORMAT :
For security purpose, you may have to enter the password to format hard disk
To format hard disk:
1. | Use the | ▲ and ▼ | buttons to go up and | ||||
| down and select HDD FORMAT. Then press |
| |||||
|
| ||||||
|
| ||||||
| or | ▼ |
|
|
|
|
|
2. | In the CHECK PASSWORD screen, press |
|
| ||||
|
| ||||||
| |||||||
| or | ▼ | . Then use the | ▲ and ▼ buttons | |||
to select the security combination number. Repeat till you key in the last number. Also, user can use the number button on the remote control to enter
the password. Press |
| or | ▼ | button again |
| ||||
|
to make the selection. To move the selection to the left and right, use ▲ and ▼ buttons
CHECK PASSWORD
ENTER PASSWORD
3.After entering the last number, the system will format the hard disk
4.It is done when the “HDD FORMAT COMPLETED” appears
| HARD | DRIVE | SETUP |
|
|
|
|
| YES |
| |
| OVERWRITE | ENABLED |
| ||
| HDD | SIZE | 37 | GB | 78MB |
| HDD | USED | 0 | GB | 0MB 0% |
| HDD | FORMAT |
|
| |
HDD FORMAT COMPLETED
Formatting the hard disk will permanently delete all the records and can no longer be retrieved
17