OSD MENU

 

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

When DVR system gets an IP address from DHCP

 

 

NETWORK SETUP

 

 

 

 

 

 

IP MODE

 

STATIC

 

 

 

 

server, the information will display as below:

 

NW ENABLE

1

2

3

4

 

 

 

 

 

 

 

 

VIDEO PORT

5001

 

 

 

 

 

NETWORK INFORMATION

 

 

 

 

UPGARDE PORT

5005

 

 

 

 

 

IP ADDRESS

 

192.168.153.100

 

 

 

 

 

 

 

 

 

 

 

SUB NET

 

255.255.255.255

 

 

 

 

 

 

 

 

 

 

 

GATEWAY

192.168.153.254

 

 

 

 

 

 

 

 

 

 

 

DNS

192.168.153.1

 

 

 

 

 

 

 

 

 

 

 

MAC ADDRESS

00.00.00.00.00.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

„PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service connecting to internet, and then, select PPPOE

mode. Use and buttons to go up and

down and select PPPOE, and then press or

to make selection. A message window will

show up as below:

GET IP NOW! WAITING...

When DVR system get an IP address, the information will display as below:

NETWORK INFORMATION

 

IP ADDRESS

 

000.000.000.000

SUB NET

 

000.000.000.000

GATEWAY

192.168.153.254

DNS

192.095.000.001

MAC ADDRESS

00.00.00.00.00.00

CHANGE

 

 

 

 

 

 

 

NW ENABLE:

Allow internet remote user to playback or monitor the channels. Without enabling the network function, the channels cannot be playback or monitor from remote site.

i

1 is Channel 1

2 is Channel 2

3 is Channel 3

4 is Channel 4

 

 

 

Use select press

and

 

buttons to go up and down and

 

NW

ENABLE

(network enable), and then

 

 

 

or

and

to move to the selection.

 

 

 

 

 

 

Use and buttons to change the selections

20