OSD MENU
MAIN MENU |
|
|
|
| |
CAMERA | SELECT | 1 | 2 | 3 | 4 |
RECORD | SELECT | 1 | 2 | 3 | 4 |
RECORD | MODE | QUAD |
|
|
|
VIDEO FORMAT | MPEG4 |
|
|
| |
RECORD | FRAMERATE | 10 |
|
|
|
VIDEO QUALITY | GOOD |
|
|
| |
RECORD SCHEDULE |
|
|
|
| |
SUBMENU |
|
|
|
| |
HARD DRIVE SETUP |
|
|
|
| |
SENSOR | SETUP |
|
|
|
|
MOTION | SETUP |
|
|
|
|
LANGUAGE SETUP | ENGLISH |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Description
CAMERA SELECT :
Enable/disable the channel number to display the video on the surveillance screen.
RECORD SELECT :
Enable/disable the channel number to record video.
The channels that are enabled in the camera i select setting can only be set for video
recording.
RECORD MODE :
Select D1/CIF recording mode.
Under D1 mode, the video recording is in 720x480 or 720x576 resolution and takes turns from one channel to the next one. D1 channel is recorded at a maximum frame rate of 15fps/12fps (NTSC/PAL) for each channel. User can switch to view the video in single full screen or QUAD screen.
Whereas in CIF mode, video recording is at a 360x240 or 360x288 resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). User can also view the video in single full screen or QUAD screen.
VIDEO FORMAT :
The recorded video is in MPEG4 format.
RECORD FRAME RATE :
Set the number of frames per second to be recorded. Refer to the table below for the available record frame rate settings. The higher the frame rate, it uses more hard disk space.
Video Standard |
|
|
| NTSC | PAL |
Record Mode |
|
|
|
|
|
EACH | 15, 5, 1 | 12, 5, 1 |
|
|
|
QUAD | 30, 15, 10, 5, 1 | 25, 12, 5, 1 |
|
|
|
VIDEO QUALITY :
Select the video quality setting from BEST, GOOD or
NORMAL.
Choosing NORMAL allows you to record more hours but the quality of the recorded video is moderate. For more information about the recording time, please visit our website and look for EB1504 MPEG4.
LANGUAGE SETUP :
Select from the available language.
14