OSD MENU
HARD DRIVE | SETUP |
|
|
| |
OVERWRITE | ENABLED | YES |
|
| |
HD1 | SIZE | 37 | GB | 78MB |
|
HD1 | USED | 0 | GB | 232MB | 0% |
HD1 | FORMAT |
|
|
| |
HD2 | SIZE | 0 | GB | 0MB |
|
HD2 | USED | 0 | GB | 232MB | 0% |
HD2 | FORMAT |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
*HD1//HD2 SIZE shows the total capacity of the hard disk.
*HD1/HD2 USED shows the amount of space that has been used.
Description
OVERWRITE ENABLED :
Enable/disable replacing the earliest record when the hard disk space runs out. By default, the HDD overwrite setting is enabled.
HD1 FORMAT / HD2 FORMAT :
For security purpose, you may have to enter the password to format hard disk.
To format hard disk:
1.Use the 
and 
or 
and 
buttons to go up and down and select HD1
FORMAT. Then press 
or
.
2.In the CHECK PASSWORD screen, press 
or 
. Then use the 
and 
or 
and 
buttons to select the security
combination number. Press 
or 
button again to make the selection. Repeat till you key in the last number.
To move the selection to the left and right, use
and 
or 
and 
buttons.
CHECK PASSWORD
ENTER PASSWORD
3.After entering the last number, if the PASSWORD CORRECT appears, you are now authorized to format the hard disk.
HARD DRIVE | SETUP |
|
|
| |
OVERWRITE | ENABLED | YES |
|
| |
HD1 | SIZE | 37 | GB | 78MB |
|
HD1 | USED | 0 | GB | 232MB | 0% |
HD1 | FORMAT |
|
|
| |
HD2 | SIZE | 0 | GB | 0MB |
|
HD2 | USED | 0 | GB | 232MB | 0% |
HD2 | FORMAT |
|
|
| |
PASSWORD CORRECT
4.Use the 
and 
or 
and 
buttons and select the hard disk you want to format.
5.It is done when the “HDD FORMAT COMPLETED” appears.
Formatting the hard disk will permanently delete all the records. The records can no longer be retrieved.
17