![](/images/backgrounds/189859/189859-12045x1.png)
NV3000/5000/6000(EXP)/7000H User Manual
4.6Familiarizing the Buttons in PTZ Camera Controller
(see also chapter 4.13)
Name | Function | |
(1) | Close | Exit PTZ camera controller. |
(2) | Setup | Configure PTZ cameras.(also see Chapter 4.13) |
(3) AutoPan | Operate the PTZ cameras automatically based on the selected | |
|
| camera group preset position number. |
(4) | Focus +/- | Adjust the focus manually to produce clear image. |
(5) | Zoom +/- | Zoom in and out the image. |
(6) | Direction buttons | Adjust and position the focal point of the PTZ camera. |
(7) | Camera ID pane | Display the PTZ camera number that is being operated. |
(8) | Save Camera | Save the PTZ camera preset position number. Select the camera |
| preset position | and click the preset position number and save it. |
(9) | Camera lens | Adjust the moving speed of the PTZ camera lens. |
| speed controller |
|
(10) Camera preset | Move the PTZ camera to the preset point. | |
| position number |
|
(11) Group AutoPan | Select to automatically operate PTZ camera in group. |
4.7 Setting Up and Using the Emap
4.7.1To Set Up the Emap
1.Click Emap.
2.When the Emap screen appears, click the area number (1 to 8 buttons) on where you want to insert the map.
3.Click Load Map to insert the map. When the open dialog box appears, locate and select the map and click Open.
36