30 AutoView 1000R/ AutoView 2000R Installer/User Guide
4. Click the Broadcast Enable checkbox to activate broadcasting.
5. From the user station, type the information and/or perform the mouse
movements you want to broadcast.

To turn broadcasting off:

From the Commands dialog box, clear the Broadcast Enable checkbox.
Using Scan Mode
In scan mode, the appliance automatically scans from port to port ( server to
server). You can select up to 16 servers from a list of all servers attached to
your appliance. You can display the list by either the server’s name or EID
number by pressing the appropriate button.
NOTE: Scanning is only available to the local user.

To add servers to the scan list:

1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Setup - Scan. The Scan dialog box appears.
Figure 3.11: Scan Dialog Box
3. The dialog box contains a listing of all servers attached to your appliance.
Click the checkbox next to the servers you wish to scan.
-or-
Double-click on a server’s name or port.
-or-
Press Alt and the number of the serv er you wish to scan. You can select up
to 16 servers.
4. In the Scan Time box, type the number of seconds (from 3-99) of desired
time before the scan moves to the next server in the sequence.
5. Click OK.