SwitchView User Manual

Mouse

Mouse jumps or “hugs” screen

If the mouse has been hot-plugged while running in

Windows, you may need to close and restart Windows.

If the mouse still does not function, try the mouse resynchronization command: <CTRL><CTRL>ZM<Enter>.

Mouse is inoperable on one or more channels

Try the mouse reset command: <CTRL><CTRL>MR<Enter> or <CTRL><CTRL>MW<Enter> depending on the type of mouse you have. Check the table below for the appropriate keyboard sequence. If your mouse type is not listed, use the MR keyboard sequence.

Verify that the mouse is plugged into the mouse port in the User Console area on the rear panel of the unit.

Verify that the computer works properly with a mouse connected directly to it. If not, try another mouse.

If you are using a serial mouse, verify that you are using an Avocent Serial Mouse adaptor.

Peripheral Mouse

Microsoft

Logitech

Intellipoint

MouseWare

 

Driver

Driver

Logitech MouseMan Wheel

MW

MR

Logitech Trackman Marble Wheel

MW

MR

Logitech Wheel Mouse

MW

MR

Logitech Trackman Marble FX

MR

MR

Logitech Marble Mouse

MR

MR

Three Button

MR

MR

Microsoft IntelliMouse

MW

MW

Microsoft Explorer

MW

MW

 

 

 

8