38 Avocent Emerge ECMS2000U Extender Installer/User Guide
5. Choose Session Retry. The Session Retry Menu will appear.
Figure 3.27: Session Retry Menu
To change the retry settings:
1. Access the Session Retry Menu via the serial menu as described above.
2. To change the time interval between retry attempts, choose Session Retry Timeout Seconds.
You will be prompted to enter a new timeout value in SS (seconds) format.
3. Type a value between 1 and 60 (inclusive) and press Enter.
4. To confirm your selection and exit the screen, type 0 (zero) and press Enter.
Audio Performance Settings
You can use this option to modify the audio performance settings or to disable audio support. There
are three settings available: high, medium and off. The high setting provides the best audio
performance and should be used when high ne twork bandwidth is available. The mediu m setting
should be used if network bandwidth is limited or if the network latency is high. If you choose off
audio support will be disabled.
NOTE: To ensure that audio operates correctly, configure the Receiver and the Transmitter with identical audio
performance settings.
To change the audio performance setting for the Transmitter:
1. Activate the serial menu as described in Accessing the serial menu on page 14.
2. Choose option 2 to access the Transmitter menu. If the password option is enabled, you will be
prompted for a password. See Authentication on page 24.
3. Type the password and press Enter. The Transmitter Main Menu will appear.