10LongView Wireless Installer/User Guide

Installing a LongView Wireless Extender

Follow the step-by-step procedures listed in the To install a LongView Wireless transmitter and To install a LongView Wireless receiver sections to properly install your new KVM extension system.

WARNING: To reduce the risk of electric shock or damage to your equipment -

- Disconnect the power from the unit by unplugging the power supply from the electrical outlet.

To install a LongView Wireless transmitter:

1.Ensure that the video setting of your computer is 1024 x 768, 800 x 600 or 640 x 480 at 60 Hz refresh rate. Best performance will be achieved if the color resolution is set to 24 bit color or higher.

2.Power down the computer that will be part of your LongView Wireless Extender.

3.Unplug the peripherals (keyboard, mouse, monitor and speakers with built-in amplifiers, if applicable) from your computer.

Transmitter

Cables

Power

Supply

Peripheral Cables

Audio Cable

Figure 2.1: LongView Wireless Transmitter Installation Example