Chapter 2: Installation

11

4.Prepare locations for your LongView Wireless equipment, computer and peripherals. Place the transmitter near your computer. Best performance is achieved when the antennas are clearly visible and free from obstructions.

5.Connect the LongView Wireless transmitter cables into the computer’s PS/2 keyboard (purple connector), PS/2 mouse (green connector) and monitor connections (blue connector).

6.Using the supplied audio cable, connect one end to the LongView Wireless transmitter’s audio input connection (lime green connector) and the other end to the computer’s audio output connection (lime green connector).

7.Connect your LongView Wireless transmitter to an AC power source with one of the power supplies included with your LongView Wireless Extender.

NOTE: The transmitter must be powered up before the computer.

NOTE: Use only an Avocent-supplied power supply.

8.Power up your computer.

Connecting the LongView Wireless receiver

Virtually any industry-standard display device can be attached to the LongView Wireless receiver, as long as it has a 15-pin D shell connector for video input and can accept VGA (640 x 480), SVGA (800 x 600) and XGA (1024 x 768) resolution video.

To install a LongView Wireless receiver:

1.Select a location for your LongView Wireless receiver. Find a convenient position for locating the LongView Wireless receiver, such as a desktop that is near your extended display. Best performance is achieved when the antennas are clearly visible and free from obstructions.

2.Connect the extended display’s video input into the LongView Wireless receiver’s video input (blue connector).

NOTE: The extended display must have a standard 15-pin D-shell RGB analog interface.