SwitchView SC Installer/User Guide

TAMPER EVIDENT STICKER

TAMPER EVIDENT STICKER

PS/2 MOUSE CABLE

VGA MONITOR CABLE

PS/2 KEYBOARD CABLE

2.Locate your PS/2 keyboard and mouse, as well as your VGA video monitor.

3.Plug your VGA monitor cable into the port labeled “VIDEO” on the back of your SwitchView SC. Plug your PS/2 keyboard cable and your PS/2 mouse cable into the ports labeled “KBD” and “MSE” respectively.

Connecting computers to the SwitchView SC

1.Locate your first input cable. It will have a 25-pin “D” connector at one end. Plug this cable into any available lettered channel port on the rear of the SwitchView SC. The other end of the input cable will have three connectors: a 15-pin “HDD” connector for your video, a 6-pin miniDIN connector for a PS/2 keyboard connection and a 6-pin miniDIN connector for a PS/2 mouse connection. The PS/2 mouse connector is green and marked with a mouse icon.

Plug these connectors into the matching ports on your computer.

6