POWER WIRING

Two plug-in wall transformers are included with the housing. Use one to provide power for the heater and blower in the housing, and the other for the camera. Determine where the transformers will be located, then run two sets of power wires into the wall mount bracket (Four total power wires). Use the chart below to determine the correct gauge of wire needed based on the length of the run and the 30vA power line.

24 VAC Wiring Distances

The following are the recommended maximum distances for 24VAC with a 10% voltage drop. (10% is generally the maximum allowable voltage drop for AC-powered devices.)

 

 

 

 

Wire Gauge

 

 

 

Total vA consumed

22

20

18

16

 

14

12

10

 

30

65

90

130

225

 

350

525

830

50

35

56

90

143

 

228

362

576

Maximum distance from transformer to housing

CONNECTING THE TRANSFORMERS (Figure 2)

Determine which transformer will be attached to the camera. Attach the red and orange wires to the terminal points on the transformer .

For the transformer which will be used for the heater and blower, attach the yellow and green wires to the terminal points.

NOTE: You may attach wires to either terminal, however MAKE SURE THAT THE TRANSFORMERS ARE ATTACHED TO THE PROPER CONNECTION ON THE HOUSING.

Accessory

Power

Green

Yellow

Accessory

Power

The unit is setup with (2) individual power inputs.

1.Accessory Power (yellow and green wire)

2.Camera Power (red and orange)

If you wish to provide a single power transformer it is recommended that:

1.Be certain that you know the total power consumption of the housing Heaters (25 watts) + Blowers (2 watts) + camera/pan-tilt (not supplied)

213

=

24 watts @ 13Vdc

 

 

 

214

=

14 watts @ 12Vdc

 

 

 

231D/232D

=

25 watts @ 24Vdc

 

 

 

Camera

Camera

Power

Power

 

Orange

 

Red

2.Check the supplied wiring chart to be sure that you have the proper gauge wire for the distance that you intend to run your power wires.

3.Bring power to the 3 and 4 position of the power connector (yellow and green wire)

4.Two jumpers are provided in the housing packet. Jumper from the 1st position to the 3rd position and from the 2nd position to the 4th position of the terminal block. Be careful not to short between the yellow and green wires.

Add 2

jumpers for

single power

input

One Power Supply for both Camera and Accessory Power 52 watts (VA), 24 VAC, Class 2 Only

NOTE: In this combination, run power to the camera connector, then run jumper wires (not provided) to the accessory side of the connector.

- 13 -

Page 13
Image 13
Axis Communications 25734 manual Watts @ 13Vdc 214 Watts @ 12Vdc 231D/232D Watts @ 24Vdc

25734 specifications

Axis Communications is renowned for its innovative security solutions, and the Axis 25734 is a testament to this legacy in surveillance technology. This network camera prides itself on delivering high-quality video monitoring, perfect for various applications, from retail environments to large-scale public spaces.

A standout feature of the Axis 25734 is its exceptional resolution capabilities. It offers an impressive 12 MP resolution, providing crystal-clear imagery that captures minute details, essential for forensic analysis and security evaluations. The camera's ability to provide Wide Dynamic Range (WDR) allows it to perform optimally in complex lighting conditions, ensuring that all parts of a scene are visible, despite bright and dark areas coexisting.

Designed for versatility, the Axis 25734 includes a motorized zoom lens, enabling users to adjust the focal length effortlessly. This feature is particularly valuable in dynamic environments where surveillance needs may vary, allowing operators to quickly switch their focus from a wide view to a more detailed perspective without compromising image quality.

The camera is built with advanced analytics capabilities that can enhance security operations significantly. With built-in video analytics, users can set up motion detection alerts, helping to promptly identify suspicious activities. This technology contributes to proactive security measures, allowing for quick responses to potential threats.

In terms of connectivity, the Axis 25734 supports Power over Ethernet (PoE), simplifying installation by allowing the camera to receive power and network connectivity through a single cable. This feature not only reduces installation complexity but also enhances flexibility in camera placement.

Axis Communications has also focused on cybersecurity, integrating robust security features within the Axis 25734. The camera includes secure communication protocols and firmware updates designed to protect against unauthorized access, ensuring that sensitive surveillance data remains safe.

Additionally, the camera is designed for resilience, featuring an IP66-rated enclosure that offers protection against dust and water ingress. This durability allows for deployment in diverse environmental conditions, from humid outdoor settings to dust-laden industrial sites.

In summary, the Axis 25734 is a powerful tool in the landscape of network cameras, offering superior image quality, flexibility through zoom capabilities, intelligent analytics, and strong cybersecurity measures. Its durable design further extends its applicability across various environments, making it an ideal choice for comprehensive surveillance needs.