Page 6

AXIS 210/210A/211/211A Installation Guide

Install the hardware

! IMPORTANT! - The 210/210A is designed for indoor use only, and must always be positioned where it is not exposed to direct sunlight or strong halogen light, which can cause permanent damage to the camera’s image sensor. Damage as a result of exposure to strong light is not covered by the Axis warranty.

IMPORTANT! - The AXIS 211/211A is designed for indoor and outdoor use. To use the camera outdoors, it must be installed in an approved outdoor housing. Please see www.axis.com for more information on outdoor housings.

Connect the camera

1.Connect the Network Camera to your network using a standard network cable. Using Shielded Twisted Pair (STP) cables is recommended.

2.Optionally connect external input/output devices, e.g. alarm devices. See page 15 for information on the terminal connector pins.

3.Optionally connect an active speaker and/or external microphone.

4.Connect power, using one of the methods listed below:

The supplied power connector.

Power over Ethernet (PoE). If available, this is automatically detected when the network cable is connected (see above).

The I/O terminal connector on the rear panel.

5.Check that the indicator LED:s indicate the correct conditions. See the table on page 16 for further details. Note that some LED:s can be disabled and may be unlit.

Page 6
Image 6
Axis Communications Axis 210A, Axis 211 manual Install the hardware, Connect the camera

Axis 210A, Axis 210, Axis 211 specifications

Axis Communications is a pioneering manufacturer of network video solutions, known for its commitment to high-quality technology and innovative designs. Among its extensive range of products are the Axis 211, Axis 210, and Axis 210A network cameras, each offering unique features and specifications tailored for different surveillance needs.

The Axis 211 network camera is designed for versatility and adaptability in various environments. It features a high-quality video resolution, capable of delivering crisp and clear images. This camera supports both MPEG-4 and Motion JPEG compression formats, allowing for efficient storage and bandwidth management. Additionally, the Axis 211 is equipped with built-in Power over Ethernet (PoE) technology, simplifying installation by reducing the amount of cabling required. Users can also take advantage of its built-in web server, enabling remote access to the camera through a standard web browser.

The Axis 210 camera provides a compact and cost-effective solution for basic surveillance needs. It boasts a resolution of up to 640x480 pixels, making it ideal for monitoring smaller areas or low-traffic locations. The Axis 210 also offers flexible installation options with its lightweight design and PoE compatibility. The camera is equipped with a built-in web server, offering users a user-friendly interface for setting up and managing their surveillance feeds remotely. Additionally, its robust motion detection capabilities provide alerts, making it a reliable choice for securing premises.

For those seeking enhanced features, the Axis 210A camera incorporates audio capabilities, allowing for two-way communication. This model is suitable for environments where audio monitoring and interaction are crucial. Like the other models, the Axis 210A supports both MPEG-4 and Motion JPEG video formats, ensuring that users can achieve the desired balance between video quality and file size. Its compact design and PoE support make it easy to install in various locations, and the built-in web server offers intuitive access to camera settings.

Overall, the Axis 211, Axis 210, and Axis 210A network cameras exemplify Axis Communications' focus on quality, functionality, and user-friendliness. With features like video compression options, remote accessibility, and PoE technology, these models cater to a variety of surveillance needs across different environments, ensuring users have the right tools to maintain security effectively.