AXIS 211M Installation Guide | Page 5 |
Install the hardware
!IMPORTANT! - The AXIS 211M is designed for indoor and outdoor use. To use the camera outdoors, it must be installed in an approved outdoor housing. Please see www.axis.com for more information on outdoor housings.
Connect the cables
1.Connect the camera to the network using a shielded network cable.
2.Optionally connect external input/output devices, e.g. alarm devices. See page 12 for information on the terminal connector pins.
3.Connect power, using one of the methods listed below:
•The supplied power connector.
•PoE (Power over Ethernet). If available, this is automatically detected when the network cable is connected (see above).
•Connect power via the terminal connector. See page 12 for information on the terminal connector pins.
4.Check that the indicator LEDs indicate the correct conditions. See the table on page 13 for further details. Note that some LEDs can be disabled and may be unlit.
ENGLISH
