AXIS M1011/M1011-W/M1031-W - System Options

QoS (Quality of Service)

Quality of Service (QoS) guarantees a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency, and no packet losses. The main benefits of a QoS-aware network can be summarized as:

•The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority.

•Greater reliability in the network, thanks to the control of the amount of bandwidth an application may use, and thus control over bandwidth races between applications.

The QoS in Axis network video products marks the data packets for various types of network traffic originating from the product. This makes it possible for network routers and switches to reserve a fixed amount of bandwidth for these types of traffic. The network cameras mark the following types of traffic:

•video

•audio

•event/alarm

•management network traffic

QoS Settings - For each type of network traffic supported by your Axis network video product, enter a DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP header. When the marked traffic reaches a network router or switch, the DSCP value in the IP header tells the router or switch the type of treatment to apply to this type of traffic, for example, how much bandwidth to reserve for it. Note that DSCP values can be entered in decimal or hex form, but saved values are always shown in decimal.

For more information on Quality of Service, please see the Axis support web at www.axis.com/techsup

SMTP (email)

Enter the host names (or IP addresses) and port numbers for your primary and secondary mail servers in the fields provided, to enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.

If your mail server requires authentication, check the box for Use authentication to log in to this server and enter the

necessary information. See the online help for more information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending on the level of security required, select the version of SNMP to use. The three levels of security are:

•SNMP V1 - includes no security.

•SNMP V2c - uses very simple security. The community name can be specified as a password for read or read/write access to all supported SNMP objects. The community is the the group of network devices using SNMP.

•SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.

UPnP™

The network camera includes support for UPnP™. This is enabled by default, and the network camera then is automatically detected by operating systems and clients that support this protocol.

RTP/H.264 & MPEG-4

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video stream(s) in multicast H.264/MPEG-4 format. Only certain IP addresses and port numbers should be used for multicast

streams. For more information, please see the online help .

32

Page 31 Page 33
Page 32
Image 32
Axis Communications 1011W, M1031W, M1011 user manual Smtp email, UPnP, RTP/H.264 & MPEG-4, Snmp V1 includes no security
Page 31 Page 33

1011W, M1011, M1031W specifications

Axis Communications is a pioneer in the field of network cameras and surveillance solutions, providing a range of products tailored to meet various security demands. Among their offerings, the Axis M1031W, M1011, and M1011W stand out for their compact design, user-friendly features, and advanced technologies that cater to both home and small business environments.

The Axis M1031W is a notable addition to Axis' lineup, featuring high-quality video in 720p resolution. This compact camera is designed for easy installation and offers Wi-Fi connectivity, making it suitable for locations where wiring can be a challenge. Its advanced compression technology, including H.264 and Motion JPEG, optimizes bandwidth usage while maintaining high video quality. The M1031W also includes a built-in microphone for audio streaming, adding an additional layer of surveillance capability.

The Axis M1011 is another offering that leverages Axis' renowned technology for surveillance excellence. Offering a resolution of 640x480 pixels, it delivers clear images with excellent color reproduction, even in low-light conditions. It supports Power over Ethernet (PoE), simplifying installation by allowing the camera to receive power and data over a single cable. This makes the M1011 a great choice for installations in hard-to-reach places where power outlets may be limited.

For those looking for a wireless option, the Axis M1011W builds on the features of the M1011 but includes Wi-Fi connectivity. The M1011W ensures high flexibility in installation while providing the same quality video and PoE capabilities as its wired counterpart. With its IP-based design, users can access live video feeds remotely through smartphones, tablets, or computers, ensuring peace of mind from anywhere.

All three models incorporate tamper detection and motion detection features, allowing users to receive alerts when suspicious activity is detected. They also offer customizable motion zones, giving users the ability to tailor surveillance to specific areas of interest.

In conclusion, the Axis M1031W, M1011, and M1011W provide robust surveillance solutions with their advanced technologies, user-friendly features, and flexible installation options. Whether for a home or small business, these cameras deliver high-quality video, reliable performance, and comprehensive security for peace of mind. Axis Communications has indeed positioned itself as a leader in the security camera industry with these powerful, compact models.
Top Page Image Contents