AXIS P1224–E Network Camera
Hardware Overview
Hardware Overview
1Power indicator LED
2Status indicator LED
3Network indicator LED
4SD card slot (microSD card)
5Camera connector
6I/O connector
7Main unit
8Network connector (PoE)
9Control button
10Power connector
11Mounting rail
12Sensor unit
13Cover
Shorten Sensor Unit Cable
The sensor unit is delivered with a cable. To shorten the cable follow these steps:
1.Cut the cable to the desired length. Measure from the sensor unit.
2.Strip the plastic outer coating from the end of the cable.
3.Peel back the shield.
4.Flatten the colored wires in the order described below.
1Brown
2White/brown
3Not used
4Not used
5White/blue
6Blue
5.Insert the wires all the way into a shielded 6P6C RJ12 connector.
5
