LED Indicators, Color Indication | Axis Communications P3214-VE

AXIS P3214-VE Network Camera

Hardware Overview

•Resetting the product to factory default settings. See page 48.

•Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED	Color	Indication

Status	Unlit	Connection and normal operation

	Amber	Steady during startup. Flashes during firmware upgrade.

	Amber/red	Flashes amber/red if network connection is unavailable or lost.

	Red	Flashes red for firmware upgrade failure.

	Green	Shows steady green for 10 seconds for normal operation after restart.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

Page 7

Image 7

Axis Communications P3214-VE user manual LED Indicators, Color Indication

Contents

Axis P3214-VE Network Camera Intellectual Property Rights About this documentLegal Considerations Liability Learn More Support Axis P3214-VE Network Camera Table of Contents Performance Considerations SD Card Slot Connectors and ButtonsNetwork Connector Hardware Overview Color Indication LED Indicators Set the Root Password Access the ProductAccess from a Browser Access from the Internet Click Use Https Set Power Line FrequencyCamera Orientation Live View Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbar PTZ Controls Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video Stream Axis P3214-VE Network Camera Focus & Zoom Set Up the ProductBasic Setup When satisfied, click Enable iris to enable the iris Image VideoVideo Stream Pixel Counter Stream Profiles Click Save to apply the new settings264 White Balance Camera SettingsExposure Settings Image Appearance Day/Night Iris adjustmentShutter & Gain Set Shutter to Go to Video View Area Select an Aspect ratio and a Video stream resolutionView Area Overlay Use Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Create the action rule Privacy MaskGo to Events Action Rules Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer Settings User Defined Links Guard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt Zoom Control Queue AdvancedControls Go to Detectors Camera Tampering DetectorsCamera Tampering Motion Detection Motion Detection Parameters Set Up Motion Detection Windows Axis P3214-VE Network Camera Application Licenses Install ApplicationGo to Setup Applications Applications Axis P3214-VE Network Camera Go to Events Action Rules and click Add Setting Up an Action RuleEvents Add Recipients Go to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create Schedules Axis P3214-VE Network Camera Go to Recordings List RecordingsRecording List Continuous Recording Languages IP Address Filter System OptionsSecurity Users Certificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & Time ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/Ping DNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4 NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 Address FTP QoS Quality of Service Bonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264 Format SD Card StorageSD Card Mount and Unmount SD Card Go to System Options Storage Click Network Share MaintenanceNetwork Share To add a network share Logs & Reports SupportSupport Overview System Overview File Upload Reset to Factory Default SettingsPlain Config Scripting Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery Procedure Product is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browser Key frames Problems with streaming H.264Video and image problems, general Video Camera Settings Reformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage device Technical Specifications Memory Power Function/group Specifications System ApplicationInstallation Maintenance General Casing Performance Considerations Connectors M1.20