AXIS P5534–E PTZ Dome Network Camera

System Options

2.Release the restart button but continue to hold down the control button for about 15–30 seconds until the status LED indicator flashes amber.

3.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

4.Using the installation and management software tools, assign an IP address, set the password and access the video stream It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

47

Page 47
Image 47
Axis Communications P5534E user manual Axis P5534-E PTZ Dome Network Camera