Axis Communications Q1602 - page 30

AXIS Q1602 Network Camera

Events

Events

The Axis product can be conﬁgured to perform actions when different events occur, for example, start a recording when motion is

detected. The set of conditions that deﬁnes how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see

Applications, on page 29

.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see

Audio Detection, on page 28

.

-Motion Detection — trigger the rule when motion is detected, see

Motion Detection, on page 26

.

-Tampering — trigger the rule when tampering is detected, see

Camera Tampering, on page 26

.

•Hardware

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start

recording to the SD card.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see

I/O

Ports, on page 42

.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see

Controls on the

Live View Page, on page 10

. This can for example be used to validate a ctionsduring product installation

and conﬁguration.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be

used to send maintenance notiﬁcations.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be

overwritten to prevent the storage device from becoming full.

-Locked —triggertheruleifthestoragedeviceislocked(writeprotected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example b e used to send a

notiﬁcation when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see

Recurrences, on page 32

. This can for example be used to

upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see

Schedules, on page 32

.

Available actions include:

•Day/Night Vision Mode —setdaymode(IRcutﬁlter on) or night mode (IR cut ﬁlter off).

•Output Port — activate an I/O port to control an external device.

•Play Audio Clip —see

Audio Clips, on page 21

.

•Record Video — record video to a selected storage.

•Send Images —sendimagestoarecipient.

30

Contents

Main About this document Liability Intellectual Property Rights Equipment Modications Trademark Acknowledgments Table of Contents H a r d w a r eO v e r v i e w .......................................... A c c e s s i n gt h eP r o d u c t ....................................... M e d i aS t r e a m s ............................................. S e t t i n gU pt h ePr o d u c t ...................................... Hardware Overview Connectors AXIS Q1602 Network Camera page 38 LED Indicators Status LED when using Focus Assistant Replacing the lens Technical Specications, on page 51 Access from a Browser Set the Root Password, on page 9 Access from the Internet NAT traversal (port mapping) for IPv4, on page 39 Set the Root Password Reset to Factory Default Settings, on page 45 TheLiveViewPage Controls on the Live View Page AXIS Media Control (AMC), on page 12 Stream Proles, on page 17 AXIS Media Control viewer toolbar Page How to Stream H.264 MJPEG AXIS Media Control (AMC) Alternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the Product Basic Setup AXIS Q1602 Network Camera Video Stream Image Overlay, on page 18 H.264 Stream Proles Camera Settings Image Appearance White Balance Wide Dynamic Range Exposure Settings Privacy Mask Focus Audio Settings AMC Audio Controls, on page 10 Audio Modes AMC Audio Controls, on page10 Audio Clips Page Default Viewer for Browsers Viewer Settings AXIS Media Control (AMC), on page 12 User Dened Links Output Buttons Page Camera Tampering Events, on page 30 Setting Up an Action Rule, on page 31 Set Up Motion Detection Windows, on page 27 Motion Detection Set Up Motion Detection Windows Motion Detection Parameters Motion Detection Parameters Audio Detection Setting Up an Action Rule, on page 31 Applications Applications Page Setting Up an Action Rule page 27 page 42 Recipients Schedules Recurrences Recordi ngs Recordings page 33 Storage, on page 41 Recording List, on page 33 page 31 Page Security Users ONVIF IP Address Filter HTTPS Date & Time NTP Conguration, on page 38 DNS Conguration, on page 38 File Naming & Date/Time Formats Network Basic TCP/IP Settings Hardware Overview, on page 4 Advanced TCP/IP Settings page 35 SOCKS QoS (Quality of Service) SMTP (email) SNMP HTTPS, on page 35 Storage SD Card NOTICE Network Share Ports & Devices Connectors, on page 5 I/O Ports Port Status Maintenance Troubleshooting, on page 46 Upgrading the Firmware, on page 46 Support Support Overview Advanced Scripting NOTICE File Upload Plain Cong Reset to Factory Default Settings Hardware Overview, on page 4 Checking the Firmware Upgrading the Firmware Emergency Recovery Procedure Symptoms, Possible Causes and Remedial Actions Date & Time, on page 36 AXIS Media Control (AMC), on page 12 NAT traversal (port mapping) for IPv4, on page 39 Performance Considerations, on page 53 Technical Specications, on page 51 Emergency Recovery Procedure, on page 46 Internet Explorer only Overlay Image Settings Page Page Page Performance Considerations