Axis Communications Enter/Exit Detector, AXIS Q6045-EMk II PTZ Dome Network Camera, Detectors

AXIS Q6045-E Mk II PTZ Dome Network Camera

Detectors

1.Choose Area of interest from the drop-down list. Set the virtual area to detect if an object has disappeared from this area of interest.

Important

When configuring Object size the view shall be zoomed out to Wide position.

2.Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.

3.Use the Sensitivity slidebar to define how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar, the greater difference in luminance is needed between the object and the background for the detector to be activated.

See the online help for more information.

Enter/Exit Detector

Enter/Exit Detector is used to trigger an alarm if an object within a pre-defined area of interest has entered or left the area. Do the following to set the detector:

Note

Use the Drawing Opacity slidebar to define how transparent the area of interest or object size shape should be. Note that this change will not be saved.

1.Choose Area of interest in the drop-down list. Set the virtual area to detect moving if any objects are entering or exiting the area of interest.

Important

When configuring Object size the view shall be zoomed out to Wide position.

2.Choose Object size in the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.

33