Axis Communications Q6045-E user manual Fence Detector, Object Counter, Detectors

AXIS Q6045-E Mk II PTZ Dome Network Camera

Detectors

3.Use the Sensitivity slidebar to define how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar, the greater difference in luminance is needed between the object and the background for the detector to be activated.

See the online help for more information.

Fence Detector

Fence Detector is used to trigger an alarm if an object crosses a virtual line. Do the following to set the detector:

Note

Use the Drawing Opacity slidebar to define how transparent the area of interest or object size shape should be. Note that this change will not be saved.

1. Choose Area of interest from the drop-down list. Set the virtual line to detect objects moving across it.

Important

When configuring Object size the view shall be zoomed out to Wide position.

2.Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.

3.Use the Sensitivity slidebar to define how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar, the greater difference in luminance is needed between the object and the background for the detector to be activated.

See the online help for more information.

Object Counter

Object Counter is used to count objects that move across a virtual line. Do the following to set the detector:

Note

Use the Drawing Opacity slidebar to define how transparent the area of interest or object size shape should be. Note that this change will not be saved.

1. Choose Area of interest from the drop-down list and set the virtual line. Objects crossing this virtual line will be counted.

Important

When configuring Object size the view shall be zoomed out to Wide position.

34