hot
warm
max. 11⁄2"
Assembly
1.Flush pipe lines thoroughly.
2.Place the mixer including the sealing washer in position on the basin / bidet.
3.Slip the slide washer, washer and collar nut over the threaded base and tighten the collar nut by hand.
4.Tighten screws.
5.Connect the supply pipes to the supply valves:
6.Connect the lift rod to the
The hot and cold supplies must be of equal pressures.
Mounting |
|
Hole size in deck: |
|
Minimum: | 1 1/4" |
Maximum: | 1 5/8" |
Technical data |
|
Operating pressure: | max. 147 psi |
Recommended operating press.: | 14.7 - 72.5 psi |
Test pressure: | 232 psi |
Hot water temperature: | max. 176° F |
Recommended hot water temp.: | 149° F |
4