Installation Instructions
• Remove the mounting nut, metal washer, and fiber washer from the faucet.
• Place the faucet with sealing gasket on top of the sink.(1)
• From beneath the sink, install the fiber washer, metal washer, and mounting nut (2).
• Install the adapters to the hot and cold stops (3). Attach the check valves and filter screens to the adapters (4). Attach the hoses to the check valves (5) using two wrenches, as shown. Take care not to twist or kink the supply hoses.
Model 15100XX1
•Turn on the water supplies (1). Remove the protective cover from the sensor (2). Wait 15 seconds (3).
•Place your hand in front of the sensor to turn the water on (4).
•Adjust the temperature of the water with the lever on the side of the faucet. Pivot it forward to obtain cooler water, backward to obtain warmer water.
3 |
