Axor 15100XX1, 15101XX1 installation instructions Clean the Sink, Model

Model 15101XX1

• Turn on the water supplies (1). Remove the protective cover from the sensor (2). Wait 15 seconds (3).

• Place your hand in front of the sensor to turn the water on (4). Check the temperature of the water.

•If adjustment of the temperature is necessary, turn the water off at the supplies (1). Remove the set screw

from the rear of the faucet using a 2.5 mm allen wrench (2).

• Pull the faucet housing off (1).

• Use a slot-head screwdriver to adjust the temperature control screw (2). Turn it clockwise to make the water warmer, counter-clockwise to make the water cooler.

•Re-assemble the faucet and turn the water on. Test again. Repeat the process if necessary until the desired temperature is reached.

Clean the Sink

• Cover the sensor for 5 seconds (1). The faucet will be shut off for approximately 75 seconds to permit cleaning (2).

4