Installation
Install the friction washer and fiber washer on the valve. Push the valve up through the hole in the mounting surface. Install the sealing ring, escutcheon, and nut.
Rest the valve assembly on the mounting surface (1). Tighten the screws (2).
Push the handles into place (3).
3 |
2 |
1 |
Push the spout shank up through the mounting surface
(1).
Install the sealing ring, escutcheon, and shaft fastening ring (2).
The notch on the shaft fastening ring and the notch on the shank must face away from the basin.
Install the fiber washer, friction washer, and mounting nut (3). Tighten the mounting nut.
2 |
1 |
