Axor 38030XX1 Installation Instructions, sealing ring friction washer, tensioning screws

Models: 38030XX1

1 8

Page 3

•Sit the faucet with black sealing ring in the faucet hole on top of the mounting surface.

•From beneath, install the friction washer, metal washer, and mounting nut. Tighten the mounting nut, taking care not to overtighten.

•Check the position of the faucet. When satisfied, use a slot-headed screwdriver to tighten the tensioning screws.

•Feed the pull rod through the hole in the back of the faucet body.

•Attach the supply lines to the supply stops with standard 3/8" compression fittings (not included)

friction washer

metal washer mounting nut

Image 3

Standard 3/8" compression fittings are required for the supply lines, and they are not included.

After tightening the mounting nut, use a slot-headed screwdriver to adjust the tensioning screws until the faucet is in the desired position.

The pull rod is fed through the hole in the back of the faucet body and is used to control the drain stopper.

Contents

Uno2 Installation Instructions / Warranty38030XX1 Technical Specification Installation considerationsUno2 Single Control Lavatory Faucet Installation Instructions sealing ring friction washertensioning screws Re-setthe high temperature limit stop optional Install the pop-updrain Service Parts User InstructionsThe spout will swivel a full 360o Cleaning Procedures Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty Cleaning Materials for Faucets and ShowersPRODUCT INSTRUCTIONS AND QUESTIONS TO OBTAIN WARRANTY SERVICETel. 770 360-9880 Fax EXCLUSIONS AND LIMITATIONS