Installation
Flush the supplies thoroughly before installation.
Install the metal washer and friction washer on the valve. Push the valve up through the hole in the mounting surface. Install the mounting plate.
Rest the valve assembly on the mounting sur- face. Tighten the screws.
Place the handle assembly over the valve with the lever or cross in the desired off position. Hold the lever or cross steady with one hand. With the other hand, thread the escutcheon down over the mounting plate.
Assemble the spout: Push the escutcheon onto the bottom of the spout (1). Fasten the retaining screws with a 5mm allen wrench (2). Push the pull rod down through the spout.
