Sit the spout on the countertop. Install the mounting piece mounting collar.
Attach the compression Y to the bottom of the spout fitting with the enclosed 10 mm compres- sion fitting. The metal side of the ferrule should point upwards. Tighten wrench tight.
Screw the connection hoses to the Y.
Attach the hoses to the valves with the enclosed 3/8“ compression fittings. Use two wrenches, as shown, to prevent the hoses from twisting.
Connect the valves to the stops with 1/2“ supp- ly lines (not included).
Install the drain.
Turn on the water and check all connections for leaks.
7/16” |
3/4” |