Axxess Interface OESWC-CLASS2H installation instructions Knowledge Is Power, REV. 2/4/11

Models: OESWC-CLASS2H

1 8

Page 8

INSTALLATION INSTRUCTIONS FOR PART OESWC-CLASS2H

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

1-800-221-0932 axxessinterface.com

Image 8

Contents

INSTALLATION INSTRUCTIONS FOR PART OESWC-CLASS2H 03-UPCLASS2 HARNESS FOR OE RF/STKCOPYRIGHT 2004-2011METRA ELECTRONICS CORPORATION OESWC-CLASS2HWiring the OESWC interface Setting up the OESWC transmitterTroubleshooting the Auto Detect Mode Programming the ASWCSTALK Wiring of ASWCSTALK and interfaceSTALK Troubleshooting the Auto Detect Mode 1.Turn the ignition on1.Volume up 2.Volume down 3.Seek up 4.Seek down 1.Volume up 2.Volume down 3.Seek up 4.Seek down5.Mode source 5.Mode sourcePage KNOWLEDGE IS POWER INSTALLATION INSTRUCTIONS FOR PART OESWC-CLASS2HCOPYRIGHT 2004-2011METRA ELECTRONICS CORPORATION REV. 2/4/11